The D24 is a deliquescent compressed air dryer for 375 CFM. It's designed to remove harmful moisture from compressed air lines. The dryer has no moving parts or power requirement, which makes it ideal for tough operating environments, intermittent flows, mobile equipment, outdoor installations, and areas with electrical restrictions.
How it works. The D24 consists of an epoxy lined tank filled with Dry-O-Lite desiccant tablets. Wet air enters the bottom of the tank and flows up through these tablets, which absorb water vapor and slowly dissolve, lowering the dew point by approximately 20⁰ F. Liquid collects at the bottom of the tank to be drained. Dry compressed air exits the top of the tank. An F200-400 or equivalent filter should be installed immediately after the dryer to remove oil mist and particulates. Clean dry air is now ready for use. The benefit of the D24 relative to other drying technologies is the simplicity. No moving parts. No power required.
Installation. Connect air lines and add Dry-O-Lite desiccant tablets.
Maintenance. Drain liquid after each 8 hours of operation. A manual ball valve is included. Consider installing a MDV-400 automatic drain with a 1" ball valve. Every 2-3 months inspect the Dry-O-Lite level by looking thru the sight glass on the side of the tank. Top off the tank with new Dry-O-Lite tablets as necessary.
Specifications & Features
- Rated Flow Capacity: 375 CFM at 100 PSIG
- 200 PSI Maximum Working Pressure
- 2" NPT Inlet / Outlet
- 500 Lb Dry-O-Lite Required (Sold Separately)
