100 CFM Deliquescent Air Dryer, 2" Connections, 250 PSI Max Pressure, Dry-O-Lite Desiccant, Van Air Systems D12

$4,750.00
Shipping:
Calculated at Checkout
Flow Rating (CFM):
100
Connection:
2 NPT
Max. Pressure (PSI):
250

The D12 is a deliquescent compressed air dryer for 100 CFM.  It's designed to remove harmful moisture from any air system using up to a 25 horsepower air compressor.  The dryer has no moving parts or power requirement, which makes it ideal for tough operating environments, intermittent flows, point of use applications, mobile equipment, and areas with electrical restrictions.

How the D12 works.  The D12 consists of an epoxy lined tank filled with Dry-O-Lite desiccant tablets.  Wet air enters the bottom of the tank and flows up through these tablets, which absorb water vapor and slowly dissolve.  Liquid collects at the bottom of the tank to be drained.  Compressed air exits the top of the tank.  An F200-100 or equivalent filter should be installed immediately after the dryer to remove oil mist and particulates.  Clean dry air is now ready for use.  The benefit of the D12 relative to other drying technologies is the simplicity.  No moving parts.  No power required.

Installation.  Connect air lines and add Dry-O-Lite desiccant tablets.

MaintenanceDrain liquid after each 8 hours of operation.  A manual ball valve is included.   Pro tip: use flexible tubing to collect the liquid in a container.  Consider installing a MDV-400 automatic drain with a 1" ball valve.  Every 2-3 months inspect the Dry-O-Lite level by looking thru the sight glass on the side of the tank. Top off the tank with new Dry-O-Lite tablets as necessary.  A D12 dryer will consume approximately 130 lbs. of Dry-O-Lite desiccant per 2000 hours operation at peak flow (100 CFM).

Specifications & Features

  • Rated Flow Capacities: 100 CFM @ 100 PSIG; 122 CFM @ 125 PSIG; 144 CFM @ 150 PSIG.
  • 250 PSI Maximum Working Pressure
  • ASME Code Certified Carbon Steel Vessel, with Enamel Exterior Coating and Internal Epoxy Lining
  • 2" NPT(f) Inlet and Outlet Connections
  • 1/2" Ball Valve Included
  • 2 Site Glasses for Desiccant Level Monitoring
  • Dimensions: 51" (h) x 12" (diameter), 130 lbs. Empty
  • Up to 20⁰ F Dew Point Suppression
  • 10 Year Vessel Warranty

What's Included

  • (1) Model D12 Dryer
  • (1) Manual Drain Valve

Recommended Accessories

Technical Documents

Shipping

The D12 compressed air dryer and 3 x 50 lbs. pails of Dry-O-Lite desiccant ship to addresses in the lower 48 U.S. states for free.  The dryer is boxed and strapped to a pallet.  The Dry-O-Lite pails are also strapped to the pallet and shrink wrapped.  The shipping weight is approximately 375 lbs.  The ship-to site must have a forklift or loading dock to unload the pallet.  For lift gate service to addresses without forklift access, contact us.  Additional charges may apply.  Filter and auto drain accessories, if purchased, will be shipped separately by UPS Ground.

10 year warranty: 5 year 100% warranty on the vessel, plus 5 additional years pro-rated.

How can we help?

Do you need technical support, an order update, or a special quote? Are you having trouble finding the right part or product? Use the email form to contact us directly.

Contact Us