MH Series high inlet temperature refrigerated air dryers by Mikropor-America include an on-board after cooler to effectively dry compressed in extreme conditions. Hot compressor room? Limited installation space? No problem.
Most reciprocating piston air compressors do not include an air-cooled after cooler. Piston compressors discharge compressed air at especially high temperatures, often 180° F or higher. Elevated compressed air temperatures are a challenge for any compressed air dryer, as hot compressed air contains far more water vapor than cooler air. The on-board coolers with MH Series dryers allow
Features and Specifications
- Model: MH-US-25
- Rated flow: 25 CFM at 170 PSIG, 180° F inlet compressed air, 100° F ambient
- Dew point: 50° F at rated conditions
- Differential pressure: 2.5 PSI at rated conditions
- Maximum pressure: 230 PSI
- Maximum inlet temperature: 240° F
- Maximum ambient temperature: 120° F
- Air connections: 1/2" NPT
- Microprocessor
- 3-in-1 heat exchanger
- Power supply: 115V
- Integrated air-cooled aftercooler
- Dimensions: 21" w x 21" d x 45" h
- Weight: 150 Lb
